Chapter 1: getting to know your wip310, Getting to know your wip310, Phone and charger – Cisco WIP310 User Manual
Page 7: Phone keys and buttons, Handset navigation pad, Power/end call button, Call button, Soft keys

Chapter 1
Getting to Know Your WIP310
3
Wireless-G IP Phone
Chapter 1:
Getting to Know Your
WIP310
Phone and Charger
Phone in charger
Your Cisco WIP310 Wireless-G IP Phone set consists of a
handset, charger, USB cable, and power supply
To charge the phone:
Place the phone in the charging cradle
1
Connect one end of the power supply to the phone
2
charger
Connect the other end of the power supply to an
3
electrical outlet
See
Charging the Battery
on page
8
You can also connect one end the included USB cable to
the USB port on the bottom of the phone and the other
end to your PC to charge the phone
USB port on phone
NOTE:
The battery must charge for at least 8
hours prior to the phone’s initial use Do not
power on the phone until it has charged for at
least 8 hours
Talk time for the phone is approximately three (3) hours
and standby time is approximately 40 hours
NOTE:
Talk and standby time can vary widely
depending on your phone settings and wireless
environment Cisco recommends that you keep
the phone in the charger when it is not in use
Phone Keys and Buttons
Power/End Call Button
The button with the red phone symbol is the Power/End
Call button To power on the phone, press and hold this
button until the screen is lit To power off the phone, press
and hold this button until the screen becomes dark
You also press this button to end a call or to return to the
phone Home screen at any time
Call Button
The button with the green phone symbol is the Call
button and is used to place and answer calls
Soft Keys
The silver soft keys are located under the display screen
The function of these keys depends on the phone screen
or menu you are currently viewing For example, in the
Home screen, press the left soft key for Options, and
press the right soft key for Contacts
Handset Navigation Pad
Select Button and Arrow Keys
To navigate through the phone menus, use the Navigation
Pad The Select button is the silver button in the middle of
the navigation pad
The arrow keys are used to move up, down, left and right
through the phone menus
Left soft key
Call button
Right soft key
Power/End Call
button