Cisco WIP310 - Manual (Page 16)

Chapter 2
Installing the WIP310
12 Wireless-G IP Phone
You can either scan for wireless routers in the area, or 6
input the router name directly if you know it
To search for the available networks, press the Options
soft key, then navigate to Scan Networks Press the
Select button
Wi-Fi Profiles
A list of available networks appears Navigate to the
desired network and press the Select button
Available Networks
Unsecured Routers
If your network appears in the list, and you are not using
router security, the phone automatically connects to your
network The display screen indicates whether or not the
connection was successful
NOTE: If your router did not appear
automatically in the list, security settings on your
router probably prevented its name from being
shown You need to know the name assigned to
the router by the network administrator
Routers Using Security
If you are using router security, follow the steps below
To add the profile:
In the 1 Wireless Setup > Manual Setup screen, press
Options and choose New Profile
New Profile
Press the 2 Left Arrow key to turn Auto Connect on
New Profile Settings
Scroll down and enter a profile name (such as “Home” 3
or “Work”) to identify the wireless router to which you
are connecting
Enter the name, or SSID, of the wireless router to which
4
you want to connect
If the router has security enabled, press the
5 Down
Arrow key to choose the type of security
WEP—Wired Equivalent Privacy
Security Settings