Installing the wip310 – Cisco WIP310 User Manual

Page 14

Chapter 2

Installing the WIP310

Wireless-G IP Phone

Setup Instructions

Press the Wi-Fi Protected Setup button on your

router

Wi-Fi Protected Setup button

Within two minutes, press the Select button (green

check mark icon) on your phone

The phone displays a message if the connection is

successful

NOTE:

If the connection is successful, the

phone creates a Wi-Fi Profile automatically To

view, edit, or manage your Wi-Fi Profiles, see

Manually Configuring Your Wireless Connection.

Using the PIN Connect Method

You can also connect your phone to the wireless network

by entering the phone’s PIN on your wireless router

Press the

Power/End Call button to power on the

phone

Power/End Call button

When the Home screen appears, press the

Select

button to display the Settings menu Press the Select

Button again and navigate to the Wireless Setup

Settings Menu

Press the

Select button to view your options

Navigate to

Connect by using PIN.

Connect Screen

Press the

Select button Your phone’s PIN is displayed

WPS PIN

Connect to your router’s web interface using a web

browser Your computer must be connected to your

wireless network Enter the IP address of the wireless

router in the browser toolbar
If required, enter the user name and password (By

default, Linksys routers typically use “admin” for the

user name and “admin” for the password )