Advanced functions, Performing a factory reset, Restarting the phone – Cisco WIP310 User Manual
Page 32
Chapter 4
Advanced Functions
28
Wireless-G IP Phone
Scroll to
3
Software Version The phone lists the software
version
To upgrade your phone firmware using the upgrade
utility:
Download the Cisco WIP310 Upgrade Utility from
1
www.linksys.com/wip310
onto your computer
Turn off your WIP310 and connect it to your computer
2
using the USB cable
Double click the Cisco WIP310 Upgrade Utility and
3
follow the on-screen instructions When the upgrade
is complete, disconnect the phone from your PC and
power it on
To upgrade your phone firmware if your WIP310 is part of
a Cisco SPA9000 Voice System:
Start Internet Explorer, and enter the following URL:
1
From the menu at the top of the page, select
2
Support > Technical Support
Click
3
Choose a Product If you are visiting the site for
the first time, you may be prompted to choose your
location before continuing
On the
4
Select Product Category page, choose IP PBX
from the Voice over IP (VoIP) drop-down list
On the
5
Choose The Device page, choose SPA9000
Under
6
Downloads, choose the Click Here link
Choose the version in the drop-down list
7
Under Driver, click Setup Wizard and download it to
8
your PC
Double-click
9
SetupWizard.exe to run the program
Performing a Factory Reset
WARNING:
This option resets all the phone
settings to the factory default The phone
settings are restored to the same settings the
phone had when it came out of the box The call
histories, speed dials, contacts, and any other
custom changes are erased!
Settings > Factory Reset
After navigating to
1
Factory Reset in the Settings menu,
press the Select button to see the Factory Reset
options
Press the
2
Up or Down Arrow key to navigate to the
setting you want to reset to Factory default settings
Press the
3
Select button (check mark icon) to confirm
or press the Cancel soft key to exit without changes
Press the Back soft key to move back one screen Press the
Power/End Call button to return to the Home screen
Restarting the Phone
Use this option to restart the phone If you are on an active
call, it is disconnected
After navigating to
1
Restart Phone in the Settings menu,
press the Select button The question, “Are you sure?”
appears on-screen
Press the
2
Select button (check mark icon) to confirm
or press the Cancel soft key to exit without changes
Press the Back soft key to move back one screen Press the
Power/End Call button to return to the Home screen