KERN & SOHN ABJ 320-4NM - Manual (Page 78)

78 ABS-N_ABJ-NM-BA -e-1312
16.2.2 Continuous Output function
1. Invoke Data Output menu

Press PRINT for 3 sec. in weighing mode.
2. Select function

Press the navigation buttons ( ) repeatedly
until „APL.PRN“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly until
„SEQ.PRN“ is displayed. The current setting is marked by
the stability display ( ).
with ( ) on
without ( ) off
 Change using TARE.
3. Set start/end of the continuous issue manually
or automatically
 Press PRINT
 Press the navigation buttons ( ) repeatedly
until „MANU“ is displayed. The current setting is marked
by the stability display ( ).
with ( )
The continuous data output starts after
pressing of PRINT and ends by pressing
ON-OFF
without ( )
The continuous data output starts
automatically
 Change using TARE