KERN & SOHN ABJ 320-4NM - Manual (Page 36)

36 ABS-N_ABJ-NM-BA -e-1312
10.7 Switch-over weighing unit
By pressing the UNIT key, the display can be switched over to the units enabled
before in the menu.
Call up menu

In weighing mode press the UNIT key for 3 sec. The
current setting is marked by the stability display ( ).
With stability display ( ) Unit enabled
Without stability display ( ) Unit disabled
Enable/disable units

Press TARE
Use the navigation buttons ( ) to select more units and
to enable/disable them as described before.
 Press ON/OFF repeatedly or for 3 sec., the balance will
return into weighing mode
How to change weighing units
 To return to the previously enabled weighing units go to
weighing mode by UNIT.


When switching-on the balance, the unit in which the balance has been
switched off, will be displayed.