KERN & SOHN ABJ 320-4NM - Manual (Page 49)

ABS-N_ABJ-NM-BA-e-1312 49
12.1 Zero tracking function
The zero tracking function „A.ZERO“ is turned-on by factory.
1. Check menu setting
Zero tracking symbol Zero tracking function
is displayed
switched on
is not displayed
switched off
2. Call function
 In weighing mode press TARE for 3 sec. and if
necessary press repeatedly the navigation buttons (
 ). until „Z.TRC“ is displayed. The current setting is
marked by the stability display ( ).

With stability display ( ) Function turned on
Without stability display ( ) Function switched off
3. Enable/disable function
 Press TARE
4. Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.