KERN & SOHN ABJ 320-4NM - Manual (Page 68)

68 ABS-N_ABJ-NM-BA -e-1312
15 Check weighing and target mode (check and target weighing)
• The check weighing or target mode can be applied for the application
functions (see chpt. 14).
• The balance starts in the mode, in which it has been switched off.
15.1 Check weighing
In many cases not the nominal value of the weighed goods is the decisive
parameter, but the deviation from this nominal value. Such applications are for
example the weight check of equivalent packages or the process check of parts in a
fabrication process.
The indicators
,
or in the display show, where the weighed goods are
located within the tolerance range.
These indicators are only functioning in check weighing or in target mode, otherwise
they cannot be seen.
The indicators provide the following information
Condition Grading Indicator
OVR.RNG
<
sample weight Beyond tolerance limit
No
indicator
HI.LIM < sample weight ≤ OVR.RNG Upper tolerance limit
LO.LIM ≤ sample weight ≤ HI.LM Inside tolerance range
UND.RG ≤ sample weight < LO.LIM Lower tolerance limit
Sample weight < UND.RG Beyond tolerance limit
No
indicator