KERN & SOHN ABJ 320-4NM - Manual (Page 26)

26 ABS-N_ABJ-NM-BA -e-1312
8.3 Adjustment log
This function enables automatic log issue after each adjustment. These logs may be
issued by using an optional printer.
Printout example (KERN YKB-01N):
- - - - - - - - - - - - - - - - -
CAL –EXTERNAL
- - - - - - - - - - - - - - - - -
Mode of adjustment
KERN & Sohn GmbH Company
TYPE ABJ 220-4NM Model
SN WBIIAB000I Serial no.
ID 1234
Balance identification no. (see chpt. 8.4)
REF 200.0000g Used adjustment weight
BFR 200.0001g Before adjustment
AFT 200.0000g After adjustment
-COMPLETE
-SIGNATURE- prepared by
- - - - - - - - - - - - - - - - -
Make sure that the communication parameter of balance and printer are the
same.
Call function
 In weighing mode press the CAL key for 3 sec.
 Use the navigation buttons ( ) to select „GLP.OUT“.
The current setting is marked by the stability display ( )
With stability display ( ) Function activated
Without stability display ( ) Function disabled