KERN & SOHN ABJ 320-4NM - Manual (Page 33)

ABS-N_ABJ-NM-BA-e-1312 33
10.4 Auto Power-Off function (automatic switch-off function)
To save battery when function is enabled backlight of display will automatically
switch off after a defined time during which there was no change of load or activity.
1. Call up menu
 In weighing mode press the MENU button twice
2. Select function
 Press the navigation buttons ( ) repeatedly until
„TOOLS“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „SYSTEM“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „AUTO.OFF“ is displayed. The current setting is
marked by the stability display ( ).
Further steps depend on the desired setting:
Stability display
(
)
Function set/update cancel
yes
ON
 Press PRINT and
continue with step 3.
Press TARE and
continue with step 4.
no
off
 Press TARE and
continue with step 3.
continue with step 4.
3. Set time, after which the display has to switch off
 Use the navigation key ( ) to enter the desired time in
minutes (max. 99 min.),
„Numeric input“. see chpt. 3.1.1.
 Confirm with TARE.
4. Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.