KERN & SOHN ABJ 320-4NM - Manual (Page 63)

ABS-N_ABJ-NM-BA-e-1312 63
14.2.3 Percent determination
 In weighing mode press MENU for 3 sec., the currently
set percentage determination mode is displayed.
or
 Place an empty container on the balance and tare it by
pressing TARE.
 Place goods to be weighed on balance.
The weight of the sample is displayed in percentage in
terms of the reference weight.
 Either carry out more percent weighing
or
The menu item to change the stored reference appears.
+ see chpt. 14.2.2 / 14.2.3 „Set reference“
The stored reference weight is displayed in grams, marked by the
symbol . Use PRINT to edit the weight value of the reference
value when a printer is connected.
Back to percent display, press UNIT anew.
Switching over between percentage determination and weighing
mode