KERN & SOHN ABJ 320-4NM - Manual (Page 39)

ABS-N_ABJ-NM-BA-e-1312 39
10.8 Change readability (1D/10D)
Call up menu
 In weighing mode press the MENU button twice
Select menu item
 Press the navigation buttons ( ) repeatedly until
„TOOLS“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „TARGET“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „PARAM.W“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „CHG.MIN“ is displayed.
 Confirm with PRINT
Change readability from 1D to 10 D
1. Use the navigation buttons ( ) to select „10 D“.

2. Confirm with TARE. The current setting is marked by the
stability display ( ).

3. Press ON/OFF repeatedly or for 3 sec., the balance will
return into weighing mode
In order to reset readability to 1D, repeat step 1 – 3 accordingly for 1D.