beautypg.com

Aqua sens or – Culligan Platinum Plus Series User Manual

Page 28

background image

24

Statistic

Functions

The statistical functions are reached by pressing the “Information” key. Repetitive presses of the

“Statistics” key will cycle through the standard statistics mode until cycled back to time of day

display.
Once either of the Information menus is entered the information shown for each display is

outlined below:
• Aqua Sensor - This display will only show when in aqua sensor mode (no meter attached).

The display will alternate between ‘aqua’ and ‘sensor’ every second until the ‘Information’

key is pressed or until the function times out.

• Flow Rate - This display will only show if the flow

meter is attached to the control. The display shall

show the current flow rate of the water passing

through the control. The display will show the “FLOW

RATE” and “GPM” icons and the current flow rate

passing through the flow meter for as long as the “-”

key or “Information” key is not pressed.

This display shall never time out, as opposed to the rest of standard statistics (10 minutes).

• Capacity Remaining (%)(standard statistics)

- This display will only show if the flow meter is

attached to the control. The display shows the percent

capacity remaining before regeneration will be

triggered. The display will show the “SOFTWATER”,

“REMAINING” and “%” icons. This display shall

never time out, as opposed to the rest of standard

statistics (10 minutes).

• Today’s Water Usage - This display will only show

if the flow meter is attached to the control. The display

will show the accumulated flow of water for the current

day. The value is to start totalizing at 12:00 AM and

reset to 0 at 11:59:59 PM. The display will show the

“TODAY’S”, “WATER USAGE” and “GALLONS” icons

and the total days flow.

• Average Daily Water Usage - This display will

only show if the flow meter is attached to the control.

The display will show a running 7-day average of

daily water usage. The display will show the “AVG

DAILY”, “WATER USAGE” and “GALLONS” icons

and the averaged flow value.

AQUA

SENS OR

SOFT WATER

REMAINING

0 47

%

TODAY'S

WATER USAGE

1 87

GALLONS

AVG DAILY

WATER USAGE

02 13

GALLONS

00 5.6

FLOW RATE GPM