Philips VKR 6865 - Manual (Page 9)

Controls and connections
HiifZiim .*■ w ■
Refer to the diagrams on the front foldout page.
O External microphone jack (MIC)
o Exclusive microphone
Omnidirectional condenser microphone for simultaneous sound
recording.
0
8:1 zoom lens
F1.4, f = 8,5 — 68 mm. filter diameter: 52 mm
0 Auto-focus sensor window
Allows light to enter for measuring the camera-to subject
distance.
0 White balance sensor window
Allows light to enter tor white balance adjustment.
0 Electronic viewfinder
For monitoring scenes being shot or the playback picture after
recording. Several on screen indicators are included, as well
as the date/time or used time if selected.
0
FULL AUTO button
Pressing this button puts the focus and white balance under
automatic control and selects the standard shutter speed.
Auto-focus can be cancelled by pressing the FOCUS button:
auto vrhite balance can be cancelled by pressing the
W.BALANCE button; the high-speed shutter can be selected by
pressing the SHUTTER button. Pressing the FULL AUTO button
in the full-auto mode has no effect.
0 FOCUS select button
Switch to AUTO for automatic focus, and switch to MANUAL to
focus manually. Check on the LCD. The focus mode is reversed
each time this button is pressed. The auto-focus mode can also
be selected (together with the auto-white mode) by pressing the
FULL AUTO button.
O SHUTTER select button
Pressing this button switches the shutter between 1/1000 (1000).
1/500 (500), 1/250 (250)-second high-speed shutter and 1/50-
second (STD) speeds, as display on the LCD. The standard
shutter speed can also be selected by pressing the FULL AUTO
button.
0 W.BALANCE select button
The white balance is manually selectable using this button.
Press once to display the current white balance mode in the
LCD. Continue pressing to cycle through the available modes.
; Halogen or tungsten lighting.
iS : Fluorescent lighting.
•j^ : Daylight.
AUTO ; Automatic white balance adjustment.
0 Counter MEMORY button
Press this button after resetting the counter to "0" at a point on
the tape you want to locate later, and the tape will stop
automatically at the counter reading of around "0” during
rewind or fast forward.
0
LCD (liquid crystal display)
White balance (W.BALANCE) mode indicator SHUTTER mode
indicator
Focus mode indicator Monitor indicator
FDCUSiEHliS MANUAL
W. BALANCE: HDEI^-aior monitor
SHUTTERSni 1000 500250 .Q
____________
OOOO m
uuuu m
Tape counter Memory mark Battery warning
Condensation warning
Tape counter:
Battery warning:
Condensation warning:
Memory mark:
Symbolic mode
indicator
Shows from “0" to “9999".
Blinks when the battery power
becomes insufficient for normal
operation'.
Appears when excessive
condensation occurs inside the unit.
Appears when the MEMORY button
is pressed.
Symbolic mode indicator
STOP: H
QUICK 1
REVIEW; 1 iW
Blinking
RETAKE
RE- ^
WIND:
Blinking
PLAY: ► REWIND:
RETAKE
FOR- ^ ►►
WARD:
Blinking
PAUSE: 11
(STILL) * *
FAST
FORWARD:
TAPE END A
WARNING: "
Blinking
RECORD: 0
REVERSE
PICTURE ►
SEARCH:
INSERT: (5
RECORD 11A
PAUSE: • “
FORWARD
PICTURE ^ ►►
SEARCH;
AUDIO DUB: ^