Philips VKR 6865 - Manual (Page 10)

0 Counter RESET button
0 Cassette holder
Insert a VHS-C video cassette for recording or playback.
0
POWER switch
Slide to turn the power on. The Stop indicator appears on the
LCD display. Slide again to switch off power.
0 REC standby button
Press to engage the Recording standby mode. To start
recording, press the recording start/stop buttons © or ®.
0 INSERT/MONITOR button
Push this button when you wish to monitor shots before actually
recording them. This function allov/s you to view the scene on
the viewfinder without recording it. Push the STOP button to
release it. To enter the Insert Edit mode, press this button while
in the Recording Standby mode.
0 AUDIO DUB. button
Press this button together with the PLAY button for audio
dubbing.
0 RECORD REVIEW button
If you want to review the end of the recorded segment for
confirmation, press this button from the Record-Pause mode,
the tape will be rewound for about two seconds of programme
time and played back automatically for this section after which
It will stop in the Record-Pause mode in standby for the next
shot.
© REW/PICTURE SEARCH button
Pressing this button in the Stop mode rewinds the tape;
pressing it in the Play mode allows fast play-back in reverse.
0 PLAY button
Press to start playback. When this button is pressed when the
unit is in the Recording pause mode, the unit will enter the
Recording mode.
© FF/PICTURE SEARCH button
Pressing this button in the Stop mode fast-forwards the tape;
pressing it in the Play mode allows fast playback.
0 PAUSE/STILL button
Press to view a still picture during playback or pause playback.
When this button is pressed in the Recording mode, the unit
will enter the Recording pause mode.
0 STOP button
Press to engage the Stop mode.
© EJECT switch
To open the cassette hoider.
© EDIT ON/OFF switch
Normally, set to OFF. For best picture quality when dubbing, set
It to the ON position.
© REMOTE control jack
For connection of the optional 22AV5131 pause remote
controller.
© Earphone jack (PHONE)
© AV OUT connector
Both audio and video signals can be delivered from this
connector.
For playback with a TV set not equipped with AV terminals,
connect the RF-converter 22AV5158 (optional) to this connector
and to the TV. To dub from this unit, connect the AV input
connectors of a second recorder to this connector, using the
provided AV output cable. To play back from this unit to a TV
set. make a connection between this connector and a TV’s AV
input terminal using the AV output cable.
© ALARM ON/OFF switch
Switch to ON to engage the trigger alarm system. Switch to
OFF when you do not wish to use this system. When this switch
IS set to ON. an electronic alarm beeps when the Recording
start/stop button IS pressed to begin recording. The electronic
alarm beeps twice when the Recording start/stop button is
pressed for record pause. This alarm helps prevent recording
errors.
© Thumb rest
Place your thumb on this grooved area next to the start/stop
switch between switch operations.
© Recording start/stop button
Press this button in the Recording Standby mode to start
recording. Pressing it again re-engages the Recording Standby
mode.
© Second recording start/stop button (sub trigger)
Functions exactiy as the other recording start/stop button, for
use when recording with the Camcorder heid iow.
0 DATE/TiME REC ON/OFF button
Press this button when you do not wish to record the date/time
This will remove date/time indications from the viewfinder.
Press again to record date/time. Date/time will reappear in the
viewfinder.
0 DATE/TIME SELECT button
Use to select the portion of the clock or date setting to be
changed. Cycles through the year, month, day, hour, and
minute settings. To end adjustment, press once after selecting
the minute portion.
0 DISPLAY SELECT button
Press this button to select the date/time display and Recording
mode. It cycles through the modes in the following order:
- Auto date ■
record
reserve
■ Date —
display
- Date/time ■
display
►Time —
display
The auto-date-record function automatically displays and
records the date for 5 seconds upon turning on the power and
beginning recording. Before recording begins this mode Is
indicated m the viewfinder by auto date record reserve
indication "—.—.—
0 DATE/TIME SET button
Use to set the built-in clock and date function
© Viewfinder mount
Attach the provided viewfinder.
0 TITLE PAGE button
Press this button to select which page of memory you wish to
store your title in. This button only functions when the title is
displayed in the viewfinder.
© TITLE ON/OFF button
Press to mix memorized title or illustration with action being
recoded. Press again to end mixing process.
0 Macro button
Turn the zoom ring v/hile pressing this button for macro
shooting.
0 Manual zoom lever
Use to turn the zoom ring manually.
0 Manual focus ring
Use to turn the focus ring manually.