Philips VKR 6865 - Manual (Page 17)

Recording operation
Preparations
^ Attaching the battery pack or AC power adapter.
Slide the POWER switch to turn the power ON.
Open the cassette holder by pressing the EJECT button.
Trigger alarm system
When the ALARM ON/OFF switch is set to ON, an electronic alarm
beeps when the Recording start/stop button is pressed to begin
recording.
The electronic alarm beeps twice when the Recording start/stop
button is pressed for record pause. This alarm helps prevent
possible recording errors.
First remove tape slack, then insert the cassette correctly.
See page 4. (with its safety tab in place.)
Close the cassette holder by pushing its center area.
Press the REC Standby button. The unit enters the Recording
Standby mode.
Used time display
The accumulated recording time (elapsed or used time) can be
displayed on the viewfinder.
1. Set the USED TIME ON/OFF switch to ON.
The recording time is displayed on the viewfinder screen.
2. II you wish to reset it to "00:00", press the REC TIME RESET
button.
Notes;
• When you wish to disengage the Used time display mode, set
the USED TIME ONIOFF switch to OFF.
• Unloading the cassette also resets the display to "00:00".
15