Power supply system, Where ac power is not available, Attaching the battery pack – Philips VKR 6865 User Manual
Page 13: With ac adapter, In a car, Power suppiy system
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Power supply system
The convenient 3-way power supply system gives you a choice of
the most appropriate power supply unit, depending on the
application.
CAUTIONS;
•
No function Is available without power supply.
•
Do not use any power supply other than specified.
•
Never attempt to use these power supply units with any
equipment other than the Camcorder.
Where AC power is not available
Use the battery packs:
•
SBC5212 (Super High-capacity)
Note:
The battery pack has been kept in the uncharged state for shipment.
Therefore, before use. be sure to charge it. See page 72.
Attaching the battery pack
© Pull down the battery pack release lever.
@ Align the battery pack over the outline in the battery pack mount,
and slide the battery pack into place in the direction of the
arrow.
© Push up on the battery pack release lever, until it locks into
place.
To remove the battery pack, pull down the battery pack release
lever and slide out the battery.
With AC Adapter
Use the provided AC adapter/battery charger 22AV5191.
In a car
Use the optional SBC5402 car battery cord.
• Leave the car's engine idling when using the car battery. (For
use with 12 V negative-grounded cars only.)
11