Philips VKR 6865 - Manual (Page 19)

To restart recording, press the siart/stop button.
• For a pause longer than 3 minutes, press the POWER
sv/itch to OFF.
• If the Recording Standby mode continues for longer than
about 5 minutes, the unit sv/itches itself off automatically.
To restart recording, slide the pov;er on and press the
start/stop button. This makes clean assembled recordings
possible even after a long pause.
Assemble recordings
• Repeating steps 9 — 11 produces assemble recordings.
• If recording is restarted from the Stop mode, a few frames of the
previously recorded picture is replaced with a new recording. To
avoid this, follow the technique described in "Assemble
Recording Technique — 2" on page 19.
12
To end recording, press the STOP button.
• After making sure that the tape has stopped, slide the
POWER switch to OFF,
If you wish to monitor shooting angles, compose scenes, etc.,
without actually recording on the tape, press the MONITOR button,
instead of REG standby button. The aimed-at scene will appear on
the viewfinder screen. For full-auto monitor, also press the FULL
AUTO button. To engage the Recording Standby mode from monitor,
press the REG standby button. To disengage the Monitor mode,
press the STOP button.
• Monitoring is possible whether a cassette is loaded or not.
• With a cassette loaded, monitoring is not possible during rewind
or fast forward.
• The power save circuit does not function during monitoring. (For
power save function, see page 18.)
Viewfinder monitoring
• Rewind the tape to a point from which you want to check the
recording.
• Press the PLAY button, and you can view the playback picture
on the viewfinder screen.
Notes:
• Pressing the PAUSE/STILL button during playback stops the
picture on the viewfinder screen.
• Picture search is also possible in both directions.
17