Using the camcorder as a video camera, Operation – Philips VKR 6865 User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Camcorder as a video camera

For continuous documentation of longer events, the Camcorder can be used as an independent video camera in combination with either a

deck-type or portable video recorder.

Using a recorder not equipped with a remote pause terminal

• Connect the AV OUT connector of the Camcorder to the AV IN connector of the video recorder using the supplied AV output cable.

Operation

1. Press the MONITOR button. The camera output signal is nov/

available via the AV output cable.

2. Put the connected recorder in the Record mode. Recording will

start Tape start/stop should be controlled with the recorder s

buttons.

Note:

In this configuration, it is possible to obtain a continuous recording

and an edited-out recording of the same event simultaneously,

because the Camcorder s start/stop button only controls the tape

inside itself while another tape loaded in the connected recorder

continues running. To record on the Camcorder's tape, follow the

same recording procedure as mentioned before: press REC standby

and then the start/stop button