Philips 48PP9103/05 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
before calling service
Symptoms
Items to Check and Actions to follow
TV not respond
ing to remote
control
•
Check batteries and replace them if necessary.
•
Clean the remote control sensor lens on the TV.
•
Operating range between TV and remote control
should not be more than 6 metres.
NICAM sound
distortion
(crackling noise)
This could be due to the antenna siting or reflected
signal.
• Switch over to the "NICAM Mono" mode by pressing
the 1-H button.
Blue or red
colour appears
around the
edges of picture
The convergence of the picture has probably drifted.
• Select the "FEATURES" menu and select
"Convergence." Adjust accordingly.
No On-Screen-
Display
• Check that you are not in the "Teletext" mode or
"Subtitle Txt" mode. To see the On-Screen-Display,
exit from this mode.