Example, Index search 61 – Philips CCB 134AT User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Index Search 61
This feature allows you to index the starting points of programs
that you have recorded on a tape.Then, you can easily rewind or
fast forward to that point.
Example:
If you are watching program number 4 and you want to fast for
ward to program number 7, skip three programs.
CURRENT PLAYBACK PROGRAM
Beginning of tape
w
End of tape
Pro. 1 Pro. 2 Pro.3
Pro. 4
Pro. 5 Pro. 6 Pro. 7
INDEX MARK
Press the COMBI button, then press the INDEX SEARCH
button to bring up the index search display.
There must be
a tape in theTV/VCR.
tNDEX SEARCH
00
ENTER INDEX NUMBER
Within 10 seconds, use the Number buttons to enter the
number of programs that you want to skip.
Enter a zero
before single-digit numbers. For example, to skip three programs,
press Number buttons 0,3. If you do not make an entry within 10
seconds, theTV/VCR will exit Index Search mode.
3
Within 10 seconds, press the F.FWD/^ button or the
REW(ind)/-^ button to skip forward or backward.
The
TV/VCR will fast forward or rewind to the beginning of the
desired program, then begin playback. (The program numbers
count down on the screen as the searching progresses.TV pro
gramming will appear during the search.)
Helpful Hints
Up to 20 index marks may be
searched.
This funaion will not operate In
recording mode.
Press the STOP/'^ button to stop
the search.
An Index mark will be made auto
matically when a recording begins.
The index mark Is not made at a
point at which recording is paused.
The time gap between index marks
should be greoter than I minute for
SP recording, 2 minutes for LP
recording, and 3 minutes for SLP
recording.