Hookingupthetvivcr – Philips CCB 134AT User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6
HookingUptheTVIVCR
Hook up yourTV/VCR using one of the connections shown.
A.
Hooking Up YourTV/VCR
With a Cable Signal or
Outdoor Antenna
B
Connect the Cable signal to
Hooking Up YourTV/VCR
With a Cable Box
To view any channel, set theTV/VCR
to the Cable Box output channel
(channel 03 or 04).Then, select chan
nels at the Cable Box.
c.
Hooking Up YourTV/VCR
With an Indoor Antenna
To install a rod antenna (not sup
plied), push the stem of the antenna
into the antenna hole on the top of
theTYA/CR. Connect the antenna
wire to the ANT(enna) Jack on the
back of theTV/VCR as shown.
Extend the antenna and adjust its
length, direction, and angle for the
clearest picture.