Philips CCB 134AT - Manual (Page 30)

30 Recording
Read and follow the steps below to record a TV program.
I
Press the COMBI button, then place a tape with its record
tab intact {see page five) in theTV/VCR.
The power will come
on. Or, if the tape is already in theTV/VCR, press the
POWER button to turn on theTV/VCR, if necessary.
2
Press the SPEED button until the desired tape speed
appears on theTV/VCR screen.
Detoi/s about tape speed are
given below.
3
Use the CH(annel) /s/v button or the Number buttons to
select the channel to be recorded.
(Channels cannot be
changed during recording.)
4
Press the REC(ord)/OTR button once to start recording.
The REC(ord) light will glow.
* If there is not a tape in theTV/VCR, NO CASSETTE flashes on
the screen briefly.
». If the tape does not have a record tab, PROTECTED CASSETTE
CANNOT RECORD flashes on the screen briefly.The TV/VCR
will eject the tape. Insert another tape.
5
To pause the recording (for exanaple, during commer­
cials), press the PAUSE/STILL button. The REC(ord) light will
flash. To resume recording, press the PAUSE/STILL button
again or the REC(ord)/OTR button. The REC(ord) light will
glow.
6
To stop recording, press the STOP/V button.
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (T160,TI20,andT60).There are three playback
speeds: SP, LP, and SLR During playback, the VCR selects the tape
speed automatically,When recording, you can change the tape
speed using the SPEED button.You cannot record in LP speed.
Cassette ty oe / Playback Time
Tape Speed TI60 TI20 T60
SP(Standard Play) 2 hrs.
40 mins.
2 hrs. 1 hr.
LP(Long Play)
(playback only)
5 hrs.
20 mins.
4 hrs. 2 hrs.
SLP(Super Long Play)
8 hrs. 6 hrs. 3 hrs.
CD CD CD
CD CD CD
CD CD CD“
GD CD B
R
o o
i,© o o
PHILIPS
3
Helpful Hints
You cannot record one channel while
watching another.
Recording options are on pages
31-41.
You cannot record if DEFEAT
RECORDING is set to ON. (REC
DEFEATED will flash on the screen.)
Details are on page 33.
If you pause a recording for more
than five minutes, the TV/VCR will
switch to Stop mode automatically
to protect the video cossette tape
from damage.
You can change the tape speed with
the SPEED button while a recording
is in progress, but some distortion
may oppeor on the tape.