Philips CCB 134AT - Manual (Page 11)

Automatic Channel Setup (cont*d) 11
Adding/Deleting Channels
I
Press the COMBf buttontthen press the MENU button.
TO ADJUST PRESS /1
CKI23
> CHANNEL
FM ANTENNA
SMARTLOCK
REVIEW
EXIT
: PRIM. SETUP
2
Press the PLAY/^ button or the STOP/v button to select
CHANNEL.
TO ADJUST PRESS
CHI23
channel
FM ANTENNA
SMARTLOCK
REVIEW^
EXIT
PRiM. SETUP
■I SAVED [
3
Press the CH(annel) ZiTV button to select the channel
you want to add or delete.
TO ADJUST PRESS /1
1 CH23
'=• CHANNEL [ SAVED !
' FM ANTENNA
. SMARTLOCK
REVIEW
EXIT
\| PRIM. SETUP
J
.y
4
Press the F.FWD/>- button or the REW(ind)/-^ button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
Repeat steps 3-4 to add or delete other channels.
5
Press the STATUS/EXIT button.
Programming of the last channel you selected will appear.
5
3
Helpful Hints
Line Input mode will always be
stored in the TVIVCR’s memory as
channel 00. Vbu cannot delete it.
To review the channels memorized
by the TV/VCR, follow these steps.
1) Press the COMBI button, then
press the MENU buttorr.
2) Press the PMV/A button or the
STOP/Y button to select PRIM.
SETUP. Press the EFWDI^ button.
3) Press the PLAYIA. button or the
STOP/Y button to select CH MEM­
ORY REVIEW. Press the F.FWD/>-
button. A list of programmed chan­
nels will appear on the screen.
4) If all the programmed channels
don't fit on the screen, press the
F.FWD/^ button. If you do not
press the F.FWD/^ button within
10 seconds, the remaining channels
will appear on the screen. (If there
are no remaining channels, the pre­
vious menu will appear.) Or press
the REW(ind)/-^ button to see the
previous screen of channels.
5) Press the STATUS/EXIT button
once or twice.