Philips CCB 134AT - Manual (Page 41)

Timer Recording With the VCR P/us+ Programming System (cont^d) 41
4
Press the Number I button to record in SP speed or the
Number 2 button to record in SLP speed.
Your selection will
appear to the right of REC SPEED on the screen, although SP= I
SLP=2 will continue to flash. For details about tape speed, see
pages 30 and 63.You cannot use the SPEED button at this time.
ONE T ime program
PROGRAM I
CHANNEL 09
T ime ON 10 30 PM
TIME OFF 11 30 PM
REC SPEED S l P
SPH SLP-2
START DATE 07'l0.'2000
MONDAY
V TO END PRESS E xit
5
Press the STATUS/EXIT button. PROGRAM WAS COM­
PLETE? / PLEASE TURN OFF FOR TIMER RECORDING will
appear on the screen.
' If there is not a tape in theTV/VCR, PLEASE INSERT CASSETTE
also appears on the screen.
if there is a tape without a record tab in theTV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this happens,
insert a different tape.
6
Press the POWER button to turn off theTV/VCR power.
The REC(ord) light will flash slowly if a tape is in theTV/VCR.
If you forget to turn off theTV/VCR, PLEASE TURN OFF FOR
TIMER RECORDING appears on theTV/VCR screen two minutes
before a timer recording starts.The REC(ord) light will blink rapid­
ly until you turn off the power for the recording.
5
Helpful Hints
Turn off theTV/VCR for the
recording. Insert a tape in the
TV/VCR. Leave the Cable
Box/DBS on (if applicable).
• To exit the VCR Plus+ programming
system at any time, press the STA­
TUS/EXIT button. The display will
disappear from the screen.
• To stop 0 started timer recording,
press the STOP/EJECT button on
the TV/VCR.