Philips CCB 134AT - Manual (Page 31)

One-Touch Recording 31
The One-Touch Recording (OTR) function allows you to program
an immediate timed recording from 30 minutes to eight hours long
without setting the timer.
Before you begin, make sure:
» Channels are set up.
e There is a tape in theTV/VCR.The record tab must be intact.
Press the COMBI button, then use the CH(annel)
button or the Number buttons to select the channel you
want to record.
Press the SPEED button until the desired recording speed
{SP or SLP) appears on the screen. Detoi/s are on page 30.
3
Press the REC(ord)/OTR button repeatedly until the desired
recording length appears in the upper right corner of the screen.
Recording will begin immediately.The REC(ord) light will appear.
OTR
CH12 LENGTH 0 30
LENGTH : PRESS OTR
CANCEL : PRESS CLEAR
4
To stop an OTR before recording is finished, press the
STOP/EJECT button on theTV/VCR.
Or, press the REC(ord)/OTR button, then press the
CLEAR button, then press the STOP/T button on the
remote control.
4 Press the STOP/EJECT button
on the TV/VCR to stop the
OTR.
CD GD G3
CD CD CD
CD GD CO
GD CD FD
PHILIPS
Helpful Hints
• To check the time remoining for on
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length while
an OTR is in progress, press the
REC(ord)/OTR button until the
desired recording length appears on
the screen.
• Vbu con not pause an OTR.
• To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but­
ton.
• Too cannot record if DEFEAT
RECORDING is set to ON. Details
are on page 33.
• You can change the tape speed with
the SPEED button while a recording
IS in progress, but some distortion
may appear on the tape.
• If the end of the tape is reached
during an OTR, the TV/VCR will eject
the tape and turn itself off