32 rerecording (tape duplication) – Philips CCB 134AT User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
32 Rerecording (Tape Duplication)
Make the connections shown above, using audio and video
cables. Make sure the source unit (VCR or camcorder) is
connected to a power source.
2
The source unit will play your tape.
Insert a prerecorded tape
in the source unit.
If playback begins, press the STOP button on
the unit.
3
TheTV/VCR will record your tape.
Insert a blank tape in the
TV/VCR.
Make sure the tape’s record tab is intact.The TV/VCR
power will turn on automatically.
4
Point the TV/VCR remote control at the TV/VCR. Press
the COMBI button, then press Number buttons 0, 0 so
that A/V IN appears on the screen.
5
Point the TV/VCR remote control at the TV/VCR. Press
the SPEED button until the desired tape speed (SP or
SLP) appears on the screen.
6
Press the PLAY button on the source unit and the
REC(ord)/OTR button on your TV/VCR at the same time.
Copying will begin.
7
To stop copying, press the STOP/EJECT button on the
TV/VCR, then stop the tape on the source unit.
Hélpful Hints
Unauthorized recording of copy
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
If a program has copyrigfii protec
tion, it may not record clearly.
Different brands of equipment may
operate differently.
Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
Audio and video cables are not
included.