Philips CCB 134AT - Manual (Page 42)

42 Real-Time Counter Memory
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
2
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
ot oa PM
CHIO
S L P I 2 3 : 4 5
3
While the counter remains on the screen, press the
CLEAR button to reset the real-time counter to zero.
1,5
4
While the counter remains on the screen, press the MEM­
ORY button so that M appears on the screen.
To erase a
real-time counter memory, press the MEMORY button so that the
M disappears from the screen.
5
To go to a tape location where the real-time counter was
reset to zero, press the REW{ind)/-^ button or the
F.FWD/^ button when playback is stopped.When the
tape reaches the point at which the counter was set to
zero, the tape will stop. Press the PLAY/.A. button to
watch the tape.
Helpful Hints
The real-time counter memory will
not function during Repent Play
mode. Details are on page 43.
You may only set one real-time
counter memory at a time. If you
set the real-time counter to zero at
a second location, the previous real­
time counter to zero setting will be
lost.