Press the combi button, then press the menu button, Press the status/exit button, Blue background 47 – Philips CCB 134AT User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Blue Background 47
If you want the TV screen to be solid blue when a weak signal is
received, set BLUE BACKGROUND to ON.The screen will be
blue and the sound will be muted. Or, if you want to receive the
weak signal, set BLUE BACKGROUND to OFF. When you select a
channel that is receiving a weak signal, you will see and hear the
static in the TV programming.
To set BLUE BACKGROUND to ON or OFF, follow the steps
below.
Press the COMBI button, then press the MENU button.
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/
a
. button or the STOP/v button to select
VCR SETUP, then press the F.FWD/^ button.
[ON]
VCR SETUP
1 ONETIME PLAY
REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND (ON]
VCR PLUS+ REF. MAP
SELECT
AT
CHOOSER
TO END PRESS EXIT
CD CD CD
CD CD CD
CD CD CD
CD CD E3
o o
PHILIPS
3
Press the PLAYZ-A
v
button or the STOP/^ button to select
BLUE BACKGROUND.Then, press the F.FWD/^ button
repeatedly so that OFF (or ON) appears beside BLUE
BACKGROUND.
VCR SETUP
ONETIME PLAY [ON]
REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
> BLUE BACKGROUND [ON]
VCR PLUS^ REF MAP
SELECT AT CHOOSE ►
TO END PRESS EXIT
4
Press the STATUS/EXIT button.
Helpful Hint
A blue screen may appear briefly
between channel changes if BLUE
BACKGROUND is set to ON.To
avoid having the brief blue screen,
set BLUE BACKGROUND to OFF.