Philips CCB 134AT - Manual (Page 34)

34 Timer Recording
Follow the steps below to program the TVA^CR. to record TV pro­
grams while you're away from home.The TV/VCR will turn itself
on, record, and turn itself off automatically. Before you begin, make
sure:
* The clock is set. If not, CLOCK MUST BE SET appears, fol­
lowed by the SET CLOCK menu.
« Channels are set up.
* There is a tape in the TV/VCR. (Make sure the tape's record tab
is intact and the tape is long enough to record the program.)
Complete each step within 60 seconds of completing the
previous step. If you don’t, you may start again at step I.
Press the COMBI button, then press the MENU button.
PRIM. SETUP
VCR PROGRAM
Vj^ SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/A button or the STOP/T button to select
VCR PROGRAM, then press the FFWD/^ button.
VCR PROGRAM
> ONCE
DAILY(MON.ERi)
WEEKLY
PROGRAM REVIEW
SELECT AT CHOOSE ►
TO END PRESS EXIT
3
Press the PLAY/A button or the STOP/T button to select
a ONCE, DAILY, OR WEEKLY recording.Then, press the
F.FWD/P- button.
• ONCE;
The TV/VCR will record a TV program on any day you
choose, up to 12 months away.
• DAILY: The TV/VCR will record every day from Monday to
Friday - starting at the same time and recording the same channel
for the same length of time.
• WEEKLY: The TV/VCR will record the same channel on the
same day, at the same time, and for the same length of time
every week.
Daily
Recording
(example)
DAILY PROGRAM (MON-FRI)
PROGRAM I 2 3 ^ 5 6 7 8 -
SELECT PROGRAM NUMBER
TO END PRESS EXIT
2-3
Helpful Hints
With ShowGuard, you don't have to
worry about losing your timer
recordings. If the power fails, pro­
grammed timer recordings will be
restored when the clock is reset.
(The clock will reset itself automati­
cally if you are using the AUTO
CLOCK feature. Details are on
pages 1.4-17, If you are not using
the AUTO CLOCK feoture, reset the
clock fT3anuo//y. Details are on pages
11-13.) The timer recording will not
occur only if the timer recording wos
scheduled to take place during the
power failure.
You cannot set a timer recording if
DEFEAT RECORDINC is set to ON.
Details are on page 33.