Philips CCB 134AT - Manual (Page 28)

28 On-Screen Stotus Displays
A status display will appear when you press the STATUS/EXIT but­
ton or certain function buttons,The contents of the status display
will vary,To choose the status display mode, follow the steps
below.
If you select STATUS ON, then select COUNTER ONLY
OFF:
Whenever you press the STOP/'»' button or the PLAY/ak but­
ton, the status display will appear for five seconds. Portions of
the status display also may appear when you press other func­
tion buttons.
If you select STATUS ON, then select COUNTER ONLY
ON:
Whenever you press the PLAY/ a . button, the status display will
appear for five seconds. After five seconds, only the counter will
remain on the screen. Portions of the status display also may
appear when you press other function buttons.
If you select STATUS OFF:
: The status display will not appear when you press function but­
tons. You must press the STATUS/EXIT button to see the status
display.
Current
Counter
Memory
Press the COMBI button, then press the MENU button.
Press the PLAY/A button or the STOP/T button to select
VCR SETUP, then press the F.FWD/^ button.
3
Press the PLAY/A button or the STOP/T button to select
ON-SCREEN MODE, then press the F.FWD/^ button.
4
Press the PLAY/ a . button or the STOP/v button to select
STATUS, then press the F.FWD/^ button so that ON or
OFF appears beside STATUS.
0^-SCft£EN MODE
• STATUS [ON]
COUNTEFl ONLY [OFF]
SELECT AT CHOOSE ►
TO END PRESS EXIT
5
If you set STATUS to OFF, go to step 6. If you set STATUS
to ON, press the PLAY/.A. button or the STOP/^ button
to select COUNTER ONLY, then press the F.FWD/^ but­
ton so that ON or OFF appears beside it.
6
Press the STATUS/EXIT button.
Helpful Hint
You cannot view closed captions dur­
ing recording or tape playback if
COUNTER ONLY is set to ON.
Details are on pages 54-55,