Interlogix NVR 20 User Manual - Manual (Page 82)

76 TruVision NVR 20 User Manual
8. From the main Video Mask area, click Save at the bottom of the page to save
your settings.
9. Repeat this process for each additional camera you wish to configure with
video masking.
IP Camera Digital Alarm Input & Output Actions
Many IP Cameras have on-board alarm inputs and output. The TVN 20,
depending on the Make and Model of the IP camera supports the ability for:
• An IP Camera digital alarm input activation or motion event trigger on one
camera to trigger an alarm output on a different IP camera
• TVN 20’s alarm inputs on TVN 20 to activate outputs on an IP camera
• Digital IP Camera alarm input activation can initiate PTZ camera presets,
patterns and patrols
For a listing of IP Cameras that support these capabilities please see the section
in the Appendix for the current listing at the time of this manual printing. We
recommend that you visit http://gesecurity.com/videoupgrades for the latest
listing based upon the latest firmware available in the unit.
Configuring Digital Alarm Inputs (from the IP Camera)
To configure digital alarm inputs from supported IP cameras via the TVN 20
browser; navigate to Config > Configuration parameters> Alarm Input
Settings (under Alarm Parameters folder). The default view shows the on-the-
box (analog alarm inputs) view.