Interlogix NVR 20 User Manual - Manual (Page 16)

10 TruVision NVR 20 User Manual
Figure 4: Initial connection page
Alternatively, using Interlogix’s TruVision Navigator video management software
the user can view and respond to events from multiple TVN 20s or a mixture of
Interlogix TruVision DVRs and NVRs.
Note: PTZ and Brightness/Contrast controls are only available on specific
TruVision models of IP cameras.
Initial Config Tab Window
From this page you can quickly add IP cameras, configure recording schedules,
enable motion only recording modes as well as define the behavior of various
alarm inputs and outputs on the box. Additionally the browser allows
customization of system events affecting hard drive status, video loss, and more.
Configuration on the TVN 20 is optimized for quick connection to Interlogix’s
TruVision Navigator video management software.
There are two main configuration elements:
Remote Config – is the primary area where all IP camera functions are
scheduled and managed.
Local Config – this controls how users who only use the TVN 20 browser for
system operation may define where snapshots, video download and local
recording on the Browser’s PC are managed.