Interlogix NVR 20 User Manual - Manual (Page 31)

TruVision NVR 20 User Manual 25
Configuring Cameras via the TVN 20 – Video Streaming (Encoding)
Parameters
Fully Configurable Cameras
Figure 16: Encoding Parameters for fully configurable cameras
Under Encoding Parameters some cameras support more than one video profile
that may be used for normal, event and (low-bandwidth), sub-stream for live
streaming.
Figure 17: Encoding Parameters menu
When more than one encoding profile is available, it is necessary to select each
profile and set the configuration parameters below. Press Save after configuring
each profile before selecting another profile to configure. Repeat the steps below
for each configured encoding profile.
1. Select Channel No:
2. Under Encoding Parameters Select the stream you wish to configure.
3. Select the Stream Type - Video is the default, some cameras will support
both Video and Audio.
4. Select the desired Resolution from the drop down list.
5. Select the desired BitRate. The default is Variable.