Interlogix NVR 20 User Manual User Manual
Page 79

TruVision NVR 20 User Manual
73
11. Under the Linkage window select the actions you want taken in response to
detection (multiple actions may be selected):
• Audio
Warning to trigger a local box audible upon an event.
• Upload to Center should be checked for Interlogix Navigator
notification (uncheck if you do not wish this event reported to
Navigator).
• Trigger Alarm Ouput to fire one or more of the on-the-box alarm
outputs.
Linkage
if you want the event to send off an email based
upon your email settings.
• If
Trigger Alarm Output is enabled, the user can switch one or
more of the alarm outputs (on-the-box) under the Analog Alarm
Outputs tab (A->1 thru A->4).
12. For special configurations, some of the supported cameras allow any video
tamper event from any enabled camera to trigger a camera’s built-in alarm
output. If your cameras support this capability and you need to use the alarm
outputs, press the IP camera Alarm Output tab.