Interlogix NVR 20 User Manual - Manual (Page 49)

TruVision NVR 20 User Manual 43
• Audio Warning to trigger a local box audible upon an alarm.
• Upload to Center should be checked for Interlogix TruVision Navigator
notification.
• Trigger Alarm Output to fire one or more of the TVN 20’s alarm outputs.
• Email Linkage if you want the event to send off an email.
• If Trigger Alarm Output is enabled, the user can switch one or more of the
Alarm Outputs under the Analog Alarm Output tabs (A->1 thru A->4).
In order to enable recording for this event, select the Trigger Recording tab to
define which camera(s) will be recorded for this event.
Figure 26: Trigger Recording tab
When satisfied, click OK to return to the main Alarm Input Settings window or
select the PTZ Linkages tab if you wish to enable PTZ preset, pattern or patrol
behavior for PTZ cameras.
IMPORTANT NOTE: PTZ Linkage behaviors are not supported in the current
product version. Please see the release notes associated with any firmware
updates for announcement when the features will be supported.
If you select the PTZ linkage tab, you can define for each specific PTZ camera a
pre-programmed PTZ camera Preset, Patrol or Pattern.
Note: The setting of presets, patrols and patterns are a function of the specific IP
camera manufacturer’s web page.