Interlogix NVR 20 User Manual - Manual (Page 80)

74 TruVision NVR 20 User Manual
• The available camera alarm outputs will be listed where “D1” is
the channel number of the IP camera connected to this TVN 20
and “->1” is the specific alarm output for that IP camera.
Multiple outputs on different cameras may be enabled.
Note: Mapping an event to camera alarm outputs is only
available for IP cameras connect to that specific TVN 20.
13. Once all desired event actions have been configured press OK to return to
the main video tamper configuration page.
14. To Save your settings press the Save button
15. Repeat this process for each additional camera you wish to configure.
Video Masking
This feature creates a blocked out area within the camera field of view that can
be masked off and will not be viewable either during live or recorded views. This
feature is used where privacy considerations are necessary especially when
cameras are deployed in public settings. Up to four areas per camera may be
masked.
To utilize this feature:
1. Select the Video Mask selection from the navigation area