GTCO Summagrid IV - Users Guide Part 1 - Manual (Page 9)

Summagrid IV 9
The corded transducer is now ready for use with Summagrid IV. Proceed to step four of
these installation instructions.
NOTE: The cordless cursor/stylus has a special energy saving feature designed to extend
the life of its battery. After approximately 5-10 minutes of non-use, the cursor/stylus will
automatically shut itself off. To reactivate the cursor/stylus, simply press a button.
Preparing the stylus for cordless use.
The Summagrid IV stylus is shipped with both a corded endcap and cordless
endcap. To prepare the stylus for cordless use:
1. Unscrew the stylus endcap.
2. Insert one lithium battery (supplied by Summagraphics) by carefully plugging the
battery connector into the socket on the stylus.
NOTE: Do not force the connector into the socket. The plug and socket are
keyed and fit together in one direction only. If one way does not work, try
another.
3. Screw on the cordless endcap.
The cordless stylus is now ready for use with Summagrid IV. Proceed to step four of these
installation instructions.