GTCO Summagrid IV - Users Guide Part 1 - Manual (Page 5)

Summagrid IV 5
2.1 Pre-Installation Overview
2.1.1 Overview
Below are the components that make up a complete Summagrid IV system:
 Tablet
 PC interface cable
 9-pin-to-25-pin AT adapter cable
 Power supply
 Stylus/Cursor options: three-button stylus, four-button cursor or 16-button
cursor
 Stylus/cursor conversion kit (includes batteries for cordless usage and cables
for corded usage)
 Stylus or cursor holder
 Summagraphics Drivers/Utilities Software (optional)
2.1.2 Controller Overview
All of the cables and accessories plug into the Summagrid IV controller.
Each of the controller ports are described below.
RS-232C Port: Interfaces the Summagrid IV to an RS-232C compatible computer.
Cursor/Stylus Port: Port for the three-button stylus, or four or 16-button cursor
when used coded.
An ON/OFF switch and a power LED are also located on the Summagrid IV
controller.