Cabletron Systems 6000 - Manual (Page 73)

SNMP Traps Screen
6E128-26, 6E138-25, 6E129-26 and 6E139-25 User’s Guide 5-27
5.9 SNMP TRAPS SCREEN
Since the 6C105 is an SNMP compliant device, it can send messages to
multiple Network Management Stations to alert users of status changes.
The SNMP Traps screen is shown in
Figure 5-12 .
Access the SNMP Traps screen from the Chassis Menu screen by using
the arrow keys to highlight the SNMP TRAPS menu item and pressing
ENTER. The SNMP Traps screen displays.
Figure 5-12 SNMP Traps Screen
The following explains each field of the SNMP Traps screen.
Trap Destination (Modifiable)
Indicates the IP address of the workstation to receive trap alarms. Up to
eight different destinations can be defined.
Trap Community Name (Modifiable)
Displays the Community Name included in the trap message sent to the
Network Management Station with the associated IP address.
Chassis SNMP Traps
2311_96
Trap Community Name
public
public
public
public
public
public
public
public
6C105 LOCAL MANAGEMENT
Event Message Line
RETURN SAVE
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable Traps
[YES]
[YES]
[YES]
[YES]
[YES]
[YES]
[YES]
[YES]
EXIT