Cabletron Systems 6000 - Manual (Page 109)

Switch Configuration Screen
6E128-26, 6E138-25, 6E129-26 and 6E139-25 User’s Guide 5-63
Figure 5-24 Switch Configuration Screen
The following describe each field of the Switch Configuration screen:
Switch Address (Read-Only)
Displays the base MAC address of the switch.
Number of Ports (Read-Only)
Displays the total number of switched ports on the module. Depending on
the number of optional interfaces installed, there can be up to 30 ports for
the 6E12X-26, and up to 29 ports for the 6E13X-25.
Type of STA (Toggle)
Allows the user to set the method that switches use to decide which
switch is the controlling (Root) switch when two or more switches exist in
parallel (Spanning Tree Algorithm). Valid entries include IEEE, DEC, and
NONE. To set the STA, refer to
Section 5.18.1 .
Firmware Revision: XX.XX.XX
Switch Configuration
2311_18
BOOTPROM Revision: XX.XX.XX
Port #
1
2
3
4
5
6
7
8
State
learning
listening
standby
learning
listening
standby
listening
listening
Module Type: 6E128-26
Slot Number: X
6E128-26 LOCAL MANAGEMENT
Event Message Line
RETURN SAVE
MAC Address
00-00-1D-00-00-00
00-00-1D-00-00-01
00-00-1D-00-00-02
00-00-1D-00-00-03
00-00-1D-00-00-04
00-00-1D-00-00-05
00-00-1D-00-00-06
00-00-1D-00-00-07
Status
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
Switch Address: 00-00-1D-00-00-00
Number of Ports: 30 Type of STA: [DEC]
[9-16] EXIT
Age Time: 300