Installation, 1 required tools, 2 unpacking the 6e12x-26 and 6e13x-25 – Cabletron Systems 6000 User Manual
Page 27: Chapter 3, Required tools -1, Unpacking the 6e12x-26 and 6e13x-25 -1, Chapter 3 installation
6E128-26, 6E138-25, 6E129-26 and 6E139-25 User’s Guide
3-1
CHAPTER 3
INSTALLATION
This chapter covers the following items:
•
Required tools
•
Unpacking the 6E12X-26 and 6E13X-25
•
Power Supply requirements specific to the 6E12X-26 and 6E13X-25
•
Installing the 6E12X-26 and 6E13X-25 into the 6C105 chassis
•
Connecting to the network
3.1
REQUIRED TOOLS
A Phillips screwdriver is required to install the optional Fast Ethernet
Interface Modules into the 6E12X-26.
3.2
UNPACKING THE 6E12X-26 AND 6E13X-25
1.
Open the box and remove the packing material protecting the module.
2.
Verify the contents of the carton as listed in
Only qualified personnel should install the 6E12X-26 and
6E13X-25.
Table 3-1
Contents of Shipping Carton
Item
Quantity
6E138-25, 6E128-26
6E139-25 or
6E129-26
1
Manual Accessory Kit
1
NOTE
Before proceeding with the installation, visually inspect the
module for damage. If the module appears to de damaged
contact Cabletron Systems Global Call Center. Refer to
for details.