Cabletron Systems 6000 - Manual (Page 118)

Chapter 5: Local Management
5-72 6E128-26, 6E138-25, 6E129-26 and 6E139-25 User’s Guide
Figure 5-27 System Resources Screen
The following briefly explains each field of the System Resources screen.
Module Uptime (Read-only)
The time in days/hours/minutes that the module has been continuously
running.
CPU Type (Read-only)
Indicates the microprocessor used in the 6E12X-26 and 6E13X-25.
Flash Memory Installed (Read-only)
Indicates the amount of FLASH memory installed in the 6E12X-26 and
6E13X-25 and how much is currently available.
DRAM Installed (Read-only)
Indicates the amount of DRAM installed in the 6E12X-26 and 6E13X-25
and how much of it is currently available.
NVRAM Installed (Read-only)
Indicates the amount of NVRAM installed in the 6E12X-26 and
6E13X-25 and how much of it is currently available.
Firmware Revision: XX.XX.XX
System Resources
2311_23
BOOTPROM Revision: XX.XX.XX
Flash Memory Installed : 4 MB
DRAM Installed: 16 MB
NVRAM Installed: XX KB
Available: XXXXX Bytes
Available: XXXXX Bytes
Available: XXXXX Bytes
CPU Type: i960 HT 25Mhz
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
Module Type: 6E128-26
Module Uptime: X Days XHrs XMins
6E128-26 LOCAL MANAGEMENT
Event Message Line
SAVE
RETURN
RETURN EXIT