Section 5.22 – Cabletron Systems 6000 User Manual
Page 120
Chapter 5: Local Management
5-74
6E128-26, 6E138-25, 6E129-26 and 6E139-25 User’s Guide
5.22
HIGH SPEED INTERFACE CONFIGURATION
SCREEN (6E12X-26 ONLY)
To access the High Speed Interface Configuration Menu screen from the
Module Specific Configuration Menu screen, use the arrow keys to
highlight the HIGH SPEED INTERFACE CONFIGURATION menu
item and press ENTER. The High Speed Interface Configuration
screen
displays.
The High Speed Interface Configuration screen displays the types of
interfaces installed in ports 25 and 26, their current operating mode, and
indicates if the ports are linked. This screen also allows the user to enable
or disable Auto-Negotiation and set the Advertised Ability.
NOTE
When the HIGH SPEED INTERFACE CONFIGURATION
menu item is selected for the 6E13X-25, the applicable HSIM
Setup screen displays. Refer to the HSIM User’s Guide to set
operating parameters for the HSIM installed in the 6E13X-25.
NOTE
The High Speed Interface Configuration screen,
applies only to ports 25 and 26 of the 6E12X-26. This screen
supports the FE-100TX, FE-100FX and FE-100F3 Fast
Ethernet Interface Modules that operate at 100 Mbps. If you are
configuring a 6E13X-25, refer to the applicable HSIM User’s
Guide, or proceed to