Cabletron Systems 6000 - Manual (Page 37)

Completing the Installation
6E128-26, 6E138-25, 6E129-26 and 6E139-25 User’s Guide 3-11
a. Check that the power is turned on for the device at the other end of
the link.
b. Verify proper crossing over of fiber strands between the
applicable port on the 6E12X-26 and the fiber optic device at the
other end of the fiber optic link segment.
c. Verify that the fiber connection meets the dB loss specifications
outlined in
Chapter 2 .
If a link has not been established, contact Cabletron Systems Global Call
Center. Refer to
Section 1.7 , for details.
3.7 COMPLETING THE INSTALLATION
The 6E12X-26 and 6E13X-25 are now ready to be set up through Local
Management. Refer to
Chapter 5 , Local Management , to configure the
modules and 6C105 chassis.
NOTE
The port RX LED flashes green and amber during bootup.