Cabletron Systems 6000 - Manual (Page 130)

Chapter 5: Local Management
5-84 6E128-26, 6E138-25, 6E129-26 and 6E139-25 User’s Guide
5.23.3 Image File Download Using BootP
To download a new firmware image to the FLASH memory of the
6E12X-26 and 6E13X-25 using BootP proceed as follows:
1. Use the arrow keys to highlight the Download Method field.
2. Use the SPACE bar to select BOOTP.
3. Use the arrow keys to highlight the TFTP Gateway IP Addr field.
4. Set the IP address of the TFTP gateway server (this defaults to the
same IP address set in the TFTP Gateway IP Addr field in the General
Configuration screen).
5. Use the arrow keys to highlight EXECUTE at the bottom of the screen
and press ENTER. The message “BOOTP DOWNLOAD. WILL
COMMIT TO FLASH. REBOOT IN PROGRESS...” displays in the
event message line at the top of the screen and the new image is
downloaded into FLASH memory.