Cabletron Systems 6000 - Manual (Page 117)

System Resources Screen
6E128-26, 6E138-25, 6E129-26 and 6E139-25 User’s Guide 5-71
FLASH DOWNLOAD
The FLASH Download screen allows the user to force the 6E12X-26 and
6E13X-25 to download a new image file to FLASH memory from a TFTP
server. For details, refer to
Section 5.23 .
PORT REDIRECT FUNCTION
The Port Redirect Function screen allows the user to redirect traffic from
one or more ports on the module to a specific destination port on the
module. For details, refer to
Section 5.24 .
Section 5.15.9 , Setting the Operational Mode , describes how to
configure the modules to function as 802.1D switches.
BROADCAST SUPPRESSION
The Broadcast Suppression screen allows the user to set a desired limit of
receive broadcast frames per port per second. For details, refer to
Section 5.25 .
802.1Q VLAN Configuration
This menu item will only display if the module has been configured to
operate as an IEEE 802.1Q switch. When selected, this menu item opens
the VLAN Main Menu screen. For details, refer to the Cabletron Systems
Port Based VLAN User’s Guide.
Section 5.15.9 , Setting the Operational
Mode , describes how to configure the modules to function as 802.1Q
switches.
5.21 SYSTEM RESOURCES SCREEN
The System Resources screen, Figure 5-27 , provides information
concerning the processor, the amount of FLASH memory, DRAM, and
NVRAM that is installed and how much of that memory is available. This
screen also allows the user to monitor the current processor (switch)
utilization and the peak switch utilization.
To access the System Resources screen from the Module Specific
Configuration Menu screen, use the arrow keys to highlight the SYSTEM
RESOURCES menu item and press ENTER. The System Resources
screen displays.