FingerTec Face ID 2 (FEM 600) Manual - Manual (Page 27)

28 CONTENTS
12 • ACCESS
Using Face ID as Door Access
Face ID can be connected to door access accessories like
electromagnetic lock and doorbolt to control access to
doors. FingerTec provides all kinds of doorlock acces-
sories which can be viewed at accessory.fingertec.com .
In Access icon, you can configure 4 items which are ex-
plained below. To access to Access: Menu > Access
How Long It Takes Before
The Door Locks Again
This value is the time period for the door to lock again
after it unlocks on successful verification. Default value is
10 second and the range is between 1-10.
Delaying Door Sensor
This function only works if door sensor is available. When
a door is not closing for a specified time, the sensor will
trigger alarm system. Specify the time of the delay. De-
fault value is 10s, the range is 0-s. Choose your prefer-
ence.
Choosing Door Sensor Type
There are two types of door sensor available for door access
which are Normally Open (NO) and Normally Close (NC).
Once a door sensor is available, you have to choose the door
sensor type. Default is None.
Delaying Alarm
This function only works when there is alarm system in-
stalled with Face ID. You can adjust the time before Face ID
triggering an alarm system if the door is not closed. A tap on
the value will prompt a keypad. Input the value in seconds.
The default value is 30s.