FingerTec Face ID 2 (FEM 600) Manual - Manual (Page 12)

13 CONTENTS
RJ45-1
TXD
RXD
GND
Connector Port/Connector Pin RS232 cable PC
Connector Port RS232 /RS485 RS232 cable PC
Data Converter
Connector Port RS232 /RS485 RS232 cable PC
Data Converter
485 +
485 ---
RX+
RX-
485 +
485 ---
485 +
485 ---
RX+
RX-
485 +
485 ---
TCP/IP for Network Connection – Linking Face ID to
multiple computers using TCP/IP requires Ethernet
10/100Base-T Straight Thru Cable or “whips”. The cable
works with both 10Base-T and 100Base-TX, connecting
a network interface card to a hub or
Connector Pin Cable Color Connector
TX+ 1 • White/Orange • 1 TX+
TX- 2 • Orange • 2 TX-
RX+ 3 • White/Green • 3 RX+
4 • Blue • 4
5 • White/Blue • 5
RX- 6 • Green • 6 RX-
7 • White/Brown • 7
8 • Brown • 8
3 Power Supply Port
Insert the Power Adapter point to this port for power
4 RS232/RS485 – Wiegand Connection Port
RS232 – Connection to a computer using RS232 cable.
RS485 Single Connection - Connection to a single com-
puter using RS485 wire.
RS485 Network Connection - Connection to multiple
computers using Daisy Chain connection.
Wiegand Output – Connecting with third party connec-
tor or terminal(s)
5 Access Control Port
Linking Face ID terminal to door lock system.
6 Bell Port Linking Face ID terminal to doorbell