FingerTec Face ID 2 (FEM 600) Manual - Manual (Page 21)

22 CONTENTS
Menu > System icon > Log Settings> Workcode Mode >
Choose your preference > Save. To add work code through
Face ID, please refer to page 21.
Using Card Only
Face ID allows combination of verification methods to
achieve tighter security. This feature concentrates on card
verification. You can enable or disable Card Only feature by
choosing Y or N.
Y – Face ID only reads information from card to verify users.
N – Face ID requires other verification methods following
reading of the card.
Menu > System icon > Log Settings > Card Only > Y or N >
Save
Update
FingerTec offers update of Face ID regularly. Please always
consult your local reseller before you update firmware of
the terminal or alternatively you can contact us at support@
fingertec.com
System Information
This option in System allows installer to check the informa-
tion of the terminal including storage, firmware, algorithm,
etc. To retrieve Face ID System Information click on icon lo-
cated on the top right of the screen.
Records
Showing free storage and used storage of Face ID detailing
user count, admin count and password user. It also displays
other information such as FP templates, Face templates,
Logs templates that have been used and available.
Terminal
A click on terminal displays Terminal Name, Serial Number
of Face ID, MAC Address, fingerprint and face algorithm,
firmware version, manufacturer and manufactured date
and time.